1. Create a new image or use an already created image with Winclone Pro. 
  2. Use Disks Utility to create a new partition if one does not already exist. 
  3. Open Terminal and run the command “diskutil list”. 
  4. Under NAME find your Windows partition then confirm under IDENTIFIER the  last number in “disk0sx”.  
  5. In Terminal, type “cd ” then drag your image into Tterminal and run the command. 
  6. Run the command below, replacing “disk0sX” with the identifier found when you ran “diskutil list” command: 
    • sudo ./winclone_helper_tool –self-extract -p /dev/disk0sX 
  7. Confirm with a successful reboot into Windows side.