Category: Version 8

Verify that the EFI partition is on slice 1 by running the following command: diskutil list (note that the EFI partition is disk0s1) Verify that …

Overview Migrating a Boot Camp partition from a older, non-T2 Mac can result in a blue screen with the error message (stop code) Inaccessible Boot …

Driver Install Option After Restoring Winclone will now prompt to install drivers after an image is restored if no AppleSSD driver is detected on the …

Fixed Issue with “Make EFI Bootable” in Tools Menu If a BCD file did not already exist on the EFI partition, the BCD file was …

Winclone 8.0.2 enabled an imported WIM to be marked as WinPE Bootable. For more information, see this article on using Winclone 8 with Microsoft SCCM.

Starting with Winclone 7, the options to shrink or expand a Boot Camp partition only appear when block-based imaging has been selected. Shrinking is not …

If your organization uses SCCM to manage Windows machines, you can use the SCCM tools to create and deploy SCCM WinPE (Prestaged) media to Windows …

Migrating Windows 10 from an older Mac to a Mac Pro (2019) with Winclone 8 requires an additional step of injecting the Apple SSD driver …

Migrating Windows 10 from an older Mac to the 16″ MacBook Pro (2019) with Winclone 8 requires an additional step of injecting the Apple SSD …

Using Winclone to migrate your Boot Camp partition to a new Mac is easy. Simply make a Winclone image of your existing Boot Camp partition, then …