NSURLErrorDomain error -1012

If you receive the following error: Please be sure to install the root certificate for your certificate chain. Ifyou install it and trust it, you should be able to log in with Bleu JSS to your instance.

Bleu Station Series 200: LED Status Lights

Bleu Station Series 200 includes a two-color LED light to indicate different operating modes and status. This documents describes the different Long blue flash: Admin Mode The LED flashes with a blue light, with theLED is illuminated for three seconds, and off for one second. Short blueflash: Deployment mode. Station is broadcasting iBeacon information. Solid…

READ MORE

Managing Printers with iBeacons

Introduction Printers continue to be a support cost driver, and iBeacon technology can help drive down supporttickets and increase user delight. The Casper Suite 9.5 introduced iBeacon support for both OS X and iOS, and we have been working hard at Twocanoes Labs to make sure that our hardware and software work great with their…

READ MORE

Bleu Station: Admin Time and Operation Modes

Bleu Stations have two distinct operation modes. This article explains these modes, and how the station moves between them. Admin Mode: The Bleu Station is not acting as an iBeacon. It is available for connections and configuration. If you are using Bleu Setup, the station will appear in the list of available Stations. Deployment Mode:…

READ MORE

Connection Issues with Bleu Setup

If you are experiencing errors while trying to configure a Bleu Station, you may be experiencing a problem with the Bluetooth pairing. Steps to fix this can be found in the article, Bleu Station Reset Procedure. Symptoms include either of the following error messages: There was a problem connecting to the station. You may need…

READ MORE

Bleu Station Reset Procedure

When trying to configure the Bleu Station using Bleu Setup, an error may occur where 1) the message appears Authentication failed or device disconnected unexpectedly, 2) the name, UUID, Major and Minor fields are not editable, or 3) both. You can reset the Bleu Station back to factory defaults with the methods below. Once reset,…

READ MORE

Changing the Coverage Area

Depending on your situation, the coverage area of single Bleu Station may be too large, and interfere with nearby beacons. Alternatively, it may be too small, and generate “exit” events before you have left the area the beacon is supposed to define.Here are some steps you can take to change the area covered by the…

READ MORE

Using Bleu Setup to Configure Your Bleu Station

Bleu Setup isavailable on the App Store. Bleu Setup is a tool that enables more advanced configuration options than is available in Geohopper. Tasks you can perform in Bleu Setup include: Adjusting the power output of the beacon. Changing the password. Setting a specific UUID, Major, and Minor for use in the iBeacon broadcast. Adjustiing…

READ MORE

Alert a Connection when Leaving the Office

This is the text version of our QuickSetup Video:https://vimeo.com/106856557/ Open Geohopper on your iOS Device This Page contains the Geohopper privacy policy. You can view the privacy policy online here: https://twocanoes.com/privacy Request toAccess Location Services Geohopper needs access to your location in order to work. Geohopper uses your location to send alerts to your connections…

READ MORE